Thursday, July 15, 2010

Ducati 1098



When it comes to a superb-performing superbike, the Ducati 1198 has been in the leading pack since its inception in 2009. And on Tuesday, the Italian manufacturer unveiled the 2011 Ducati 1198 (and 1198 SP) at INTERMOT in Germany.

New for 2011, the 1198 motorcycle arrives on the showroom floor with Ducati Traction Control (DTC), Ducati Quick Shifter (DQS) and Ducati Data Analyzer (DDA) as standard equipment.

Ducati says The application of DTC to the standard model 1198 underlines Ducati's intention to broaden the use of tried and tested race-derived electronics to its high-powered range, while the introduction of DQS to the 1198 marks the first time in history that "quick-shift" electronics have been fitted to a production Ducati.



The DDA package in the 1198 enables the retrieval and analysis of data collected from a previous track session or road trip and DTC monitors front and rear wheel speeds to detect rear wheel-spin under acceleration and electronically reduces engine power to restore traction.

DQS allows the throttle to remain open when changing-up through the gearbox, helping to save vital seconds in the pursuit of faster lap-times.

The 1198 was born to perform and with a colossal 97lb-ft (13.4kgm) of torque from its Testastretta Evoluzione engine and dry weight of just 171kg (377lb) it always delivers.

Its victory-driven technology comes directly from Ducati's World Championship-winning race bikes - and it's evident in every detail of the bike.

Fully adjustable Showa front suspension carries radial mountings designed for the awesome stopping power generated by Brembo Monobloc callipers and 330mm discs.
Fully adjustable Showa suspension at the rear and lightweight 10-spoke wheels complete an impressive set-up. For 2011 the 1198 is available in traditional Ducati red with a racing black frame and graphite grey wheels.



The Testastretta Evoluzione engine is the crowning glory of Ducati's development and perfection of the L- Twin engine.

World Superbike dominance for almost two decades is the result of continual commitment to their twin-cylinder configuration.

Ducati share the reward for that commitment with World Championship- winning technologies constantly flowing from the factory race team into production engines.

The incredible 1198 (and 1198 SP) is powered by a liquid cooled, L-Twin, Desmodromic engine that produces 170hp (125kW) @ 9,750rpm and a class-beating 97lb-ft (13.4kgm) of torque @ 8,000rpm.

The 1198 achieves its capacity by using exactly the same 106 x 67.9 bore and stroke as the factory race bike.



Volumetric efficiency through the four valves per cylinder is optimised with valve diameters at 43.5mm for the inlet and 35.5mm for the exhaust. They are actuated by racing-type rocker arms, 'super- finished' for reduced friction and fatigue, and double overhead camshafts with radical profiles.

The incredible valve performances achieved are only possible because of Ducati's unique Desmodromic system, where valve closure is activated mechanically.

At high rpm it would be almost impossible for the valve to follow the steep closure profile of the cam lobe if it were relying upon a normal valve spring.

With the Desmo system, the valve is closed mechanically with the same accuracy as it is opened, enabling steep cam profiles and radical cam timings. This system is used on every single Ducati motorcycle including their world-beating Superbike and Desmosedici MotoGP bikes.

To keep Ducati's highly efficient Testastretta cylinder heads breathing to their full potential, the injection system uses racing size elliptical throttle bodies, which are an equivalent diameter of 63.9mm.

The race-designed 1198 pistons have a distinctive double-ribbed undercrown to achieve high strength and reduced friction by using minimal piston wall surface area. Using technology developed for the Desmosedici MotoGP project, the design enables reliable operation of the 106mm diameter pistons when performing at high rpm.



The 1198 Testastretta Evoluzione engines are the lightest ever used in Ducati Superbikes, thanks to Vacural technology, a crankcase vacuum die-cast manufacturing process yielding weight reductions of 3kg (6.5lbs) compared to the first generation 1098 cases.

The vacuum die-cast process ensures consistent and precise wall thickness and increased strength from absolute material purity. The weight-saving cam covers in magnesium-alloy are evident by their gold color, while the alloy outer clutch and generator covers sport a black finish.

The 1198 gears are machined from the same high-strength steel used in Ducati Corse race applications and are subjected to a shot-peening treatment that further ensures their strength and reduced fatigue.

Specifically for the track-ready 1198 SP, a dry, multiplate competition-style 'slipper' clutch is used to reduce the destabilising effect of aggressive downshifting and to provide the fine control required during extreme corner entry on the track.

The 1198, 1198 SP feature a beautiful and efficient exhaust system. Incredibly lightweight, it has been engineered with a power-increasing symmetrical 2-1-2 layout that uses 52mm-57mm diameter tubing with a wall thickness of 0.8mm (.030in).

It is equipped with a catalytic converter and two lambda probes for optimum engine mapping and Euro3 conformity. The system terminates with Ducati's trademark twin under-seat silencers, delivering that unmistakable signature sound of the big bore Desmo 90° L-Twin.

Ducati 1198 Features:

Engine
Liquid cooled, four stroke, 90°“L”twin cylinder, DOHC, desmodromic 4 valve per cylinder.

Capacity
1198

Bore x Stroke
106 x 67.9 mm

Compression Ratio
12.7:1

Induction
Marelli electronic fuel injection, elliptical throttle bodies.

Exhaust
Lightweight 2-1-2 system with catalytic converter and 2 lambda probes. Twin stainless steel mufflers

Ignition / Starting
- / electric
Clutch Dry multiplate with hydraulic control

Max Power
170hp 125 KW @ 9750 rpm

Max Torque
97 lb-ft 131.4 Nm @ 8000 rpm

Transmission / Drive
6 Speed / chain

Ratio
1st 37/15, 2nd 30/17, 3rd 27/20, 4th 24/22, 5th 23/24, 6th 22/25 /
Frame

Tubular steel Trellis frame

Front Suspension
Showa 43mm with TiO fully adjustable upside-down fork, 127mm / 5in wheel travel.

Rear Suspension
Progressive linkage with fully adjustable Showa monoshock. Aluminium single-sided swingarm, 127mm / 5in wheel travel

Front Brakes
2 x 330mm semi-floating discs, radially mounted Brembo Monobloc calipers 4-piston, 2-pad.

Rear Brakes
Single 245mm disc 2 piston caliper

Front Tyre
120/70 ZR17

Rear Tyre
190/55 ZR17
Seat Height 820mm / 32.2in

Dry-Weight
171kg / 377lb

Fuel Capacity
15.5 Litres / 4.1 US gal

No comments:

Post a Comment